Shop Onlinestep 3: choosing the appropriate flextek harness
FlexTek will work with all multi-port and sequential fuel injection systems.
We have specialty units for Chrysler/Dodge/Jeep and Boxer/Pancake engines used on
Subaru's, Porsches, Volkswagens and some Mazda's. Please allow 2
extra weeks for shipping, since these units have a custom wiring harness that
have to be made.
determine what type of fuel injectors are on your vehicle
There are several different types of fuel injectors in use today and there is a specific FlexTek harness for each type of injector.
To determine which FlexTek harness your vehicle requires disconnect the wiring harness on your vehicle from a single fuel injector and compare the injector with the pictures of the Injector Types at the bottom of this page.
NOTE: When you are ready to place your order please be sure to scroll thru the page since we have some specialty units for Chrysler/Dodge/Jeep and Boxer/Pancake Engines.
how to disconnect the wiring harness from an injector
NOTE: The wiring harness from an injector may differ from model to model.
Start by looking for the mechanism that will release the lock. It will be on the sides or on the front of the injector connector (some connectors may have a metal clip), push this clip and it should release the connector.
If you need assistance, you can either ask your local mechanic or contact our Technical Support Department at 804-776-7788.
injector type connectors
Please note which injector type connector you will need and make your proper selection when you place your order.
If you need assistance determining which injector type connector you will need, you can either check with a local mechanic or call us at 804-776-7788 and we will do our best to assist you.
