FP66G

YCM
YCM double column design on the FP66G features high rigidity and high accuracy. Equipped with Dust Collector Equipment, FP66G is suitable for industries with the need of graphite electrodes such as automobile industry.

High Accuracy Structure Design
- Head Light weight design increases dynamic response of Z-axis.
- Optical Scales on 3 axes are standard.
- Symmetrical Double Column Design reduces thermal deformation and increases machining accuracy.
- Roller type guideway design on 3 axes offers high rigidity.

Convenience for operation and maintenance
- Pneumatic unit, lubrication unit and oil mist cutting pump can be monitored and maintained collectively to reduce maintenance time.
- Tool magazine can be allocated at either right side or left side for automatic allocation.
- Two sets of compressed air filter system prevent leaking oil by being allocated separately in machining area and non-machining area.

High Efficiency Dust Collector Equipment(opt.)
- Cartridge Dust Collector applied and filter choke is detected and cleaned automatically by differential pressure detection.
- The filter bag used to can prevent the environmental pollution.
- Replacement Filter Bag and dust bags are optional to prevent dust from falling.

Eco-friendly Design
- The 30,000rpm spindle is lubricated by grease to reduce oil waste.
- 3 axes are lubricated by grease to reduce oil usage.

Dust prevention on linear guideways
- 5-step dust prevention is applied on the linear guideways.
- Ballscrews are double protected by the oil rubber+Teflon for Dust prevention.

Technical Data

  • Spindle Speed (opt.) rpm30,000
  • Max. Spindle Motor Power kW9.4
  • Spindle Taper HSK-E40 (BBT30)
  • X-axis Travel mm660
  • Y-axis Travel mm510
  • Z-axis Travel mm400
  • Distance Between Spindle Nose & Table Top mm120-520
  • Table Size mm800 x 510
  • No. T-slots x Size x Pitch mm5 x 14 x 100
  • Max. Load on Table kg500
  • Rapid Feedrate (X/Y/Z) m/min.24/24/24
  • Cutting Feedrate mm/min.1~20,000
  • Tool Magazine Capacity (opt.) T20
  • Max. Tool Weight kg3
  • Max. Tool Dimensions mmø40 x 150
  • Pneumatic Supplier kg/c㎡5.5
  • Power Consumption (Transformer Consumption) kVA51 (65)
  • Machine Weight kg6,900