Micro-finishing turning and hard-turning in the sub-micron range with lowest thermal growth require a high rigidity of the slide system and only a low number of involved axes.
All this is combined in the MICROTURN with a spindle headstock that moves in X and Z direction and a high-rigid static linear tooling table.

Technical Data

  • Working area
  • Max. swing diameter (mm)608
  • Max. Turning diameter (mm)~150
  • Max. turning length (mm)250
  • X/Z axis (mm)X 600 Z 350
  • Y1 / Y2 axis (mm)+50 / -50