SW-12R II

Star
THE ADVANTAGES
The new SW-12R II automatic CNC sliding headstock lathe was developed on the basis of the renowned SW-7 series. The machine is extremely attractive due to its compact size and universal use as either a sliding or fixed headstock lathe. The new SW-12 RII is characterised by high speeds on the main and sub spindle (15,000 rpm) and fully independent machining with 3 tool systems.

• FANUC 31i-B5 control system
• Spindle speeds on the main and sub spindle up to 15,000 rpm
• C axis control as standard on main and sub spindle
• Fully independent rear side
• Convertible from sliding headstock to fixed headstock lathe
• Movable control panel
• Two tool posts for simultaneous machining on the front side
• Low space requirement
• Three independent tool systems

KINEMATICS & TOOLS
• 7 turning tools
• Each with 4 drilling tools (front and rear side)
• 6 + α power-driven tools on the tool post
• 8 + α power-driven tools for backworking
• 10 axes

Teknisk data

  • SPECIFICATIONS
  • Diameter12 mm
  • Length135 mm / 30 mm (fixed headstock)
  • C axisMain spindle
  • C axisSub spindle
  • KINEMATICS OF THE SW-12R
  • FRONT SIDE
  • Number of axes10
  • Main spindle (headstock)Z1 / C1 axis
  • Tool post 1X1 / Y1 axis
  • Tool post 2X3 / Y3 axis
  • Max. machining diameter12 mm
  • Max. headstock stroke (standard)135 mm / 30 mm
  • Drive power main spindle3.7 kW
  • Max. main spindle speed15,000 rpm
  • Tools on the tool post
  • Turning tools7 tools (□ 10mm)
  • Drilling tools (4-spindle drilling unit)4 tools (ER11)
  • Cross machining tools6 tools (ER11)
  • Max. speed12.000 rpm
  • SUB SPINDLE
  • Sub spindleX2 / Y2 / Z2 / C2 axis
  • Max. gripping diameter12 mm
  • Drive power3.7 kW
  • Max. sub spindle speed15,000 rpm
  • Backworking tools
  • Drilling tools (4-station tool holder)4 tools (Ø 16 mm sleeve)
  • Drive (standard)8 tools
  • Max. spindle speed12,000 rpm